SEE HOW EASY IT IS! OPEN INSTALLATION MANUAL TO THE RIGHT >
Hard Freeze Climate: Closed Loop Systems to – 54 F or areas with bad water.
INCLUDES 100% COMPLETE SOLAR LOOP!!!
-
110 Volt AC Circulator with Line Cord
-
Recirculation* Differential Control including line cord
- 2 high quality 10 K sensors and 25' of wire.
- 1, 2 or 3 - 20-01 Collectors with standard mounting rails or optional end to end center connect 24' Skyline array for 2 collectors only. (10-01 SRCC and FSEC Certifications are applied for) Standard trim color is Musket Brown, free option is medium gray plus 25 optional colors.
- 50' of 1/2" Copper tubing with Brass Compression tube connections and Flashing.
- Complete connections for Rheem 80 Gallon Double Wall Heat. Exchanger Tank including two charging valves, floating ball check valve, isolation valve, 2 thermometers, pump switch, expansion tank and all connections.
- Collector Pressure Relief Valve with splash guard and Coin Vent.
- Complete collector install kit including mounting rails.
- Sample 6' section of high temperature outside insulation.
- full color Installation Instructions and Owners Manual.
- 80 Gallon Rheem/Rudd Heat Exchanger Tank, "Power Rod" or other heat exchanger solar storage tank is required.
- A 81V080HE1 is available delivered in the 48 for $1,565.00 including FREE Delivery
- All you need to add is pipe insulation and non-toxic antifreeze available at your
local automotive or RV store.
- See Installation Manual For "Charging the System" with Glycol
- Call us for special needs such as tilt kits, colors, long pipe runs and any other questions.
- 40 s/f is used most in sunnier areas like California and most all middle and southern
colder states.
- 60 s/f is used most in colder areas like New England, Colorado and all northern states.
The System 4 “Power Rod” Quick Connect (X0014XCPRQC)
It doesn’t get easier than this! This Kit allows you to easily connect a closed loop to any standard (non self-cleaning) water heater! Kit includes a Power Rod heat exchanger, water side 110 Volt pump and a Quick Connect Kit that allows you to install the Power Rod using included open loop Quick Connect in any standard tank drain valve, 2 solar loop temperature gauges are included.
|
| Number of Collectors / People |
S/F and System Number |
For HE Tank |
With Power Rod |
| 3 10-01 - 1 to 2 people |
(30 S/F) 100143C: |
$1,695.00 |
$2,695.00 |
| 4 10-01 or 2 20-01 - 3 to 4 people |
(40 S/F) 100144C or 200142C: |
$1,945.00
|
$2,945.00 |
| 5 10-01 - 4 to 5 people |
(50 S/F) 100145C: |
$2,195.00
|
$3,195.00 |
| 6 10-01 or 3 20-01 - 4 to 6 people |
(60 S/F) 100146C or 200143C: |
$2,455.00
|
$3,455.00 |
| 4 20-01 - 6 people + |
(80 S/F) 200144C: |
$2,955.00 |
$3,955.00 |
40 Watt PV Option for the Power Rod - A Great Deal!
replaces both pumps and differential controller with 12 Volt. PRPV: Add $565.00 |
IMPORTANT: OG300 is required for most rebates but OG 100 Collector Rating may be accepted for Federal 30% Rebate. The 10-01 collector is OG100 applied for and 2 10-01 collectors can be substituted for 1 20-01 collector.
A 30 S/F collector minimum is recommended for System 4. A Minimum of 2 collectors or 40 S/F up to 4 or 80 S/F is recommended for the Rheem / Rudd / Richmond 80 Gallon Heat Exchanger Tank.
|
